Roofing dumpster rental in Saint George
Need a roll-off on your Saint George roofing job? We drop it before the crew arrives and pull it clean the day the tear-off is done.
Roofing Tear-off Dumpster Sizing by Squares
How big a roll-off do you actually need for a 25-square tear-off? Our experience in Saint George shows: estimate two-thirds of a cubic yard per square for asphalt shingles; then, select a low-wall 20-yard container to handle the weight. This configuration keeps the tonnage within limits. The roll-off remains low enough to fill without heavy lifting or equipment.
15-Yard Roofing Dumpster
- Capacity: 15 cubic yards
- Fits: 15–20 squares of asphalt shingle
- Best for: Single-layer ranch and bungalow tear-offs
The 10-yard can fits a tight driveway for small tear-offs while keeping shingle weight within a single haul.
20-Yard Roofing Dumpster
- Capacity: 20 cubic yards
- Fits: 25–30 squares of asphalt shingle
- Best for: Most two-story residential tear-offs
The 20-Yard Container is our roofing workhorse with low side walls so crews can ground-throw shingles without extra scaffolding.
30-Yard Roofing Dumpster
- Capacity: 30 cubic yards
- Fits: 35–45 squares of asphalt shingle
- Best for: Multi-layer tear-offs and small commercial roofs
The 30-yard bin is sized for larger tear-offs when a second haul-out would delay crew demobilization on tight timelines.
Asphalt Shingle Weight and Tonnage Planning
The three-tab averages 250 pounds per square; architectural laminate runs closer to 400. A 25-square tear-off lands three to five tons before underlayment, so the hooklift truck must route to a roofing dumpster with a lower side wall to stay inside the weight limit on one pickup. How does that translate to a 10-yard? Plan on a single load when you cap debris under five tons.
When you mix shingle debris with framing or sheathing offcuts, we route the container to a general construction service. We handle this mixed C&D debris load differently—ensuring that all materials are processed correctly at the local Saint George facility.
Driveway Placement for Roofing Crew Workflow
We angle the roll-off so the swing-door faces your starting eave, allowing crews to ground-throw shingles directly into the bin. Before the rollers touch the concrete in Saint George, we set the container on thick wooden planks to protect the driveway surface. A six-foot tarp perimeter simplifies the post-job nail sweep. Review our roof tear-off container sizing options, and consult the asphalt shingle disposal best practices guide to ensure your site stays clear.
Drop angle
Rear door toward the roof line
Set the swing-door end facing the eave your crew is working so walk-in loading and ground-throw share the same path.
Surface protection
Wooden planks under every roller
Loaded shingle weight can gouge concrete; driveway boards must stay under the rear rollers for the rental window.
Sweep zone
Six-foot tarp perimeter
Stage magnetic sweepers on the tarp side so nail cleanup runs in parallel with loading your heavy project materials.
Tile, Slate, and Metal Roof Tear-off Containers
Concrete tile, natural slate, and standing-seam metal weigh heavily on a standard bin: they punish a container that was not built for the load. We route our specialized 30-yard lowboy for these jobs; it features reinforced sides and a heavier floor plate to manage the density. We cap fill volume well below the visual rim to keep axle weight legal. For lighter mixed loads, we provide our general construction debris service for your site.
Same-day Pickup for Fast Roof Project Turnover
Tear-offs move on tight schedules; the roll-off shouldn’t slow crews down. Dispatch routes a same-day haul-out to match the demobilization window, freeing the driveway for inspection or gutter reinstall. Saint George crews keep this swap-out precise so the homeowner isn’t left waiting!